Kajian Penerapan Teknologi UAV Drone dan Civil 3D Pada Proyek Infrastruktur Jalan di Pulau Jawa

Firda Oktaviana Mbuinga; Rani Gayatri Kusumawardhani Pradoto

doi:10.28932/jts.v21i1.7880

Authors

Firda Oktaviana Mbuinga Teknik Sipil dan Lingkungan, Institut Teknologi Bandung, Bandung, 40132, Indonesia
Rani Gayatri Kusumawardhani Pradoto Kelompok Keahlian Manajemen Rekayasa Konstruksi, Institut Teknologi Bandung, Bandung, 40132, Indonesia

DOI:

https://doi.org/10.28932/jts.v21i1.7880

Keywords:

Civil 3D, Road Construction, UAV Drone

Abstract

In 2030 it is estimated that the number of construction projects will increase by 85%, to answer this challenge, the construction world is expected to apply construction technology, some of which are UAV Drones and Civil 3D. The purpose of this study is to obtain the level of application, benefits of application, and utilization of UAV Drone and Civil 3D technology as well as to identify inhibiting factors in applying these two technologies. Data collection was carried out using a questionnaire instrument, then the data processing in this study used descriptive statistical analysis. The results of the UAV Drone application rate are rarely applied, for its use it is more applied to the monitoring stage, namely monitoring project progress, while utilization that requires advanced image processing is rarely applied. The most influential benefit of UAV Drone is minimizing time. As for the level of application of Civil 3D, which is often applied, its use is most widely applied at the design stage to design and model roads, the benefits of application that are felt to be very influential are minimizing time, increasing accuracy and efficiency, and reducing errors. From the resulting cartesian diagram, these two technologies are already in quadrant III (promoting) for UAV Drones and quadrant IV (highly implementation) for Civil 3D, so it is hoped that the authorities can make regulations or standards that can be used as a basis/reference in implementing (Infrastructure Building Information Modelling) I-BIM, especially in road infrastructure.

Downloads

References

Abbondati, F., Biancardo, S. A., Palazzo, S., Capaldo, F. S., & Viscione, N. (2020). I-BIM for existing airport infrastructures. Transportation Research Procedia, 45(2019), 596–603. https://doi.org/10.1016/j.trpro.2020.03.052

Adi, W. T., & Aghastya, A. (2017). Penggunaan Total Station Dan Autocad Civil 3D Untuk Perencanaan Grading. Jurnal Perkeretaapian Indonesia, I(2), 151.

Adi, W. T., Wiarco, Y., Prihartanto, R., & Aghastya, A. (2021). Sosialisasi Penerapan Penggunaan UAV Drone untuk Survey Pemetaan pada Bidang Jalur Perkeretaapian. Madiun Spoor (JPM), 1(2), 46–51. https://doi.org/10.37367/jpm.v1i2.184

Ariyanto, A. S. (2021). Pemanfatan Perangkat Lunak Autocad Civil 3D V. 2019 Sebagai Alat Bantu Perencanaan Jalan. Bangun Rekaprima: Majalah Ilmiah Pengembangan Rekayasa, Sosial Dan Humaniora, 7(1, April), 53–61. Retrieved from https://jurnal.polines.ac.id/index.php/bangun_rekaprima/article/view/2592

Direktorat Jenderal Bina Marga. (2020). Implementasi Teknologi Building Information Modelling (BIM) dalam Proyek Pembangunan Jalan dan Jembatan. Retrieved from https://binamarga.pu.go.id/balai-jatim-bali/index.php?/berita/detail/implementasi-teknologi-building-information-modelling-bim-dalam-proyek-pembangunan-jalan-dan-jembata

Djusar, S., Fajrizal, F., & Anggraini, K. (2022). Pelatihan Penggunaan Uav Dalam Pengambilan Gambar Peta Topografi Pada Jurusan Bkp Smkn 5 Pekanbaru. Jurnal Pengabdian Masyarakat Information Technology, 1(1), 27–34. https://doi.org/10.33557/jpm_itech.v1i1.1607

Fakhruddin, Parung, H., Tjaronge, M. W., Djamaluddin, R., Irmawaty, R., Amiruddin, A. A., … Dwipuspita, A. I. (2021). Sosialisasi dan Pelatihan Aplikasi Teknologi Building Information Building (BIM) Pada Dinas Pekerjaan Umum dan Penataan Ruang (PUPR) Kabupaten Gowa. Jurnal Tepat (Teknologi Terapan Untuk Pengabdian Masyarakat), 4(2), 261–270. Retrieved from https://eng.unhas.ac.id/tepat/index.php/Jurnal_Tepat/article/view/216%0Ahttps://eng.unhas.ac.id/tepat/index.php/Jurnal_Tepat/article/download/216/121

Hardjo, M. F. R. M., Wahyuni, A., & Rahim, M. R. (2020). Gambaran Keselamatan Pekerja Menggunakan Teknologi Pemantauan Drone Pada Proyek Konstruksi PT. X Makassar. Hasanuddin Journal of Public Health Volume 1 Issue 2 | Juni 2020 | Hal 142-151, 1(2), 142–151.

Hidayat, F., Arifin, A., Farrosi, M. A. A., Soemardi, B. W., Pradoto, R. G. K., & Puri, E. R. (2022). Technology Landscape for Surveying and Mapping in Construction Industry. International Journal of Integrated Engineering, 14(9), 74–80. https://doi.org/10.30880/ijie.2022.14.09.010

Ilmi, N., Sukamana, I., & Purba, A. (2022). Penerapan Metode Konstruksi Industri 4 . 0 Pada Siklus Proyek Jalan , Jembatan , dan Terowongan. Prosiding Seminar Nasional Keinsinyuran (SNIP) Vol.1 No.1.

Kusnadi, Gaus, A., & Rauf, I. (2022). Pelatihan Autocad Civil 3D Pada Masyarakat Jasa Konstruksi. Jurnal Pengabdian Khairun (JPK) Vol. 1 No. 1 Juni 2022, 1(1), 12–18.

Putri, E. E., Fernanda, M. L. S., & Aminsyah, M. (2021). Perencanaan Geometrik Jalan Menggunakan Autocad Civil 3D Studi Kasus Jalan Duku – Sicincin (Sta 0+000 – Sta 2+700) Provinsi Sumatera Barat. Jurnal Rekayasa Sipil (JRS-Unand), 17(2), 140. https://doi.org/10.25077/jrs.17.2.140-152.2021

Rizqy, R. M., Martina, N., & dan Purwanto, H. (2021). Perbandingan Metode Konvensional Dengan Bim. Construction and Material Journal, 3(1), 15–24.

Stefano, A. (2020). Pemanfaatan Drone dalam Pemetaan Kontur Tanah. Buletin Loupe, 16(02), 32–41. https://doi.org/10.51967/buletinloupe.v16i02.76

Syaputra, Y. (2021). Aplikasi Building Information Modelling (BIM) Pada Perencanaan dan Pemodelan Jalan. Retrieved from http://scholar.unand.ac.id/id/eprint/74492

Thaher, R. M., Murad, W., & M, H. (2021). Penggunaan Aplikasi Civil 3d dalam Merencanakan Geometrik Jalan Raya. Jurnal Talenta Sipil, 4(2), 145. https://doi.org/10.33087/talentasipil.v4i2.64

Triyono, T., Mudianto, A., & Purwanti, H. (2019). Perbandingan Perencanaan Geometrik Jalan Menggunakan Aplikasi Autocad Civil 3D dengan metode Bina Marga (Studi kasus : Ruas Jalan Bangunrejo - Wates, Provinsi Lampung). Jurnal Online Mahasiswa (JOM) Bidang Teknik Sipil, 1(1), 1–12.